Projects & Experience

HOME > PROJECTS

Delivering Engineering Solutions: Explore some of AMOG’s current and previous projects

AMOG Featured Projects

West Seno

An award-winning 3-phase FEED project which delivered an on-station FPU and TLP mooring leg replacement for the West Seno field in deepwater (WD >1000m) offshore Indonesia. This project was delivered for Chevron.

Beyond the Boom Tip

The Yolla Platform compressor heavy lift: from lift failure investigation, to lift re-engineering, vessel section, and the successful install of a 496Te module on a platform in Bass Strait for Origin Energy.

AMOG Wave Energy Converter (WEC) Project

At the forefront of engineering solutions for renewable energy, AMOG has developed two generations of WEC technology; from original designs and model tests, to scale model testing in open water.

SCORCH (Seawater Corrosion of Ropes & Chain)

A project aimed at developing design guidance to address corrosion of mooring chains and ropes in tropical waters, enabling more accurate predictions and improved maintenance practices for long-term mooring systems.

Below is a list of some of the projects AMOG has undertaken in each sector. Please contact us for more information or for detailed experience statements.

Renewable Energy Projects (including FOWT)

FLOATING OFFSHORE WIND (FOWT) PROJECTS
Front End Engineering Design (FEED) for a novel floating offshore wind turbine (FOWT) concept
FOWT Fatigue Analysis of Subsea Power Cable Spans for Hellenic Cables
Carbon Trust Research and Development studies into Mooring Systems Redundancy, Reliability and Integrity
Carbon Trust Floating Wind JIP Commercial Scale Mooring Integrity Management (CMIM) Project

Carbon Trust Research Floating Wind JIP MOSE Project Maximum Operating Seastate (MOSS)
Saint-Nazaire Offshore Wind Farm VIV Free Spanning Cable Analysis for Innosea, France
Turret-Moored Floating Offshore Wind Turbine Concept Mechanical & Structural Design
Floating Offshore Wind Project Risk Review
FOWT Mooring Integrity Management for RWE Renewables, UK

WAVE ENERGY CONVERTER (WEC) PROJECTS
Wave Energy Converter (WEC) - Sub Sea Foundations and Installation Services, Electrical Integration Services, Project Management Support Services
WEC Basis of Design & Metocean Conditions, Marine Asset Survey, Mooring Design and Project Costing Studies
Tidal energy concept Site Selection & Installation Support, Design Refinement, Liaison with local Authorities
WEC Failure investigation, Environmental and Approvals Review Portland, Wave Energy Converter Stability Analysis, Foundation design and Deployment Methodology
AMOG WEC - see feature projects (above)

Offshore Energy Projects

Pre-FEED & FEED
Crux Liquids Project pre-FEED and FEED engineering support (Timor Sea, Australia, Nexus Energy)
Full engineering support for development of the ANZON Basker Manta fields (Bass Strait, Australia) for both the Extended Production Test (EPT) and Full Field Development (FFD) phase (Anzon/Upstream Petroleum)
Pre-feasibility studies for Angostura project (Trinidad) (BHPB)
Preliminary concept design (mooring and riser configuration), uptime analyses and costing, and metocean studies for Mutineer-Exeter Disconnectable FPSO (NW Shelf, Australia, Santos)

MARINE STRUCTURAL DESIGN
Havila Phoenix Tower Loading Strength Assessment and Fatigue Analysis (TS Marine)
FPSO Frame Buckling Compliance Assessment
Dynamic Assessment of Kaombo FPSO (Angola) Topside Structure under Blast Loading (SBM Offshore)
Finite Element Strength & Fatigue Analysis for Mooring Chain Design Verification (Australia, Woodside)
Structural Design of a marine security barrier (USA)
Undersea Tailings Pipe Installation (Indonesia) Finite Element Strength Analysis (Newmont)
Riser Guard Energy Absorption Capacity Analysis for Vessel Impact (Esso Australia)
Towhead structural design (Newmont)
North Rankin A Platform (NRA, Australia) structural assessments (Woodside)
FLNG FPSO (Australia) Turret Design Fluid Transfer Turret Swivel Loadings (Granherne KBR)
FLNG (USA) Turret and Swivel Preliminary Design Assessment and Engineering Support (Granherne)
Anode Sled Replacement (Australia) Sea Fastening Structural Design Loads Assessment (PSN)
Transportation of WTN Separator Vessel (Australia) Sea Fastening Structural Design Loads Assessment (PSN)
FPSO (Australia) FEED Studies - Hull Structural Assessments (Mustang Engineering)
FPSO (Indonesia) FEED Studies - Hull Structural Assessments (Bumi Armada)
Kingfish Platform (Bass Strait, Australia) Dynamic Motion Monitoring, Platform Vibration, Statistical Analysis (Esso)
West Tuna Platform (Bass Strait, Australia) Dynamic Motion Monitoring, Platform Vibration, Statistical Analysis (Esso)
Bumi Armada FPSO FEED studies (Timor Sea)
Moorsure Safety Assurance (Prime Contractor) and Technical Safety Work for Vitol Offshore Ethane Import Terminal (Egypt)

DEEPWATER
DeepStar (Gulf of Mexico (America) - see our page on JIPs
Concept Study for Deepwater Disconnectable Mooring System (WD >1000m)
Conceptual Design of Disconnectable Turret Mooring System and Riser System (WD 1100m)
Development of Concept Basis of Design for RTM-based Disconnectable Mooring System in Golf of Mexico (America) (WD 1800m)
Umbilical Span Fatigue Analysis (West Angola, BP) (WD >1000m)
Kizomba A (Angola) As-Built Mooring Analysis (ExxonMobil) (WD 1181m)
Kizomba B (Angola) As-Built Mooring Analysis (ExxonMobil) (WD 1015m)
Detailed mooring system design engineering for Azurite FDPSO (Republic of the Congo, Prosafe Production Pte) (WD 1400m)
Mahogany FPSO (Ghana) External Turret Mooring System field requirements study
Ultra Deepwater SPAR and Barge Production Platform (Gulf of Mexico (America)) Conceptual Engineering Study (WD 800-2000m)
Cascade FPSO (Gulf of Mexico (America)) mooring concet design (WD 2740m)

MOORINGS
Montara FPSO (Timor Sea) Mooring System Rapid Response Plan (PTTEP)
Griffin Venture RTM (Northwest Shelf, Australia) RTM Mooring and Riser Assessment (BHPB Petroleum)
Mooring System Reliability Study Using a Response Surface Model (NW Shelf, Australia, Woodside)
Over a number of years, AMOG has worked with OMV New Zealand including detailed submerged asset inspoections, asset integrity support, and mooring repair design and installation engineering
Mooring and Riser System design for Cidade de Sao Mateus FPSO (Brazil, Prosafe Production Pte)
Design of flexible export riser configurations for West Tuna and Bream B and tie-ins (Bass Strait, Australia ESSO)

MOORINGS (Turrets & Swivels)
Structural analysis support for the infield retrofit of an FSO turret main roller bearing (USA, confidential client)
Development of a column turret mooring system to be integrated into the Intrepid FPSO (Singapore, Rubicon Offshore)
OSX3 FPSO Riser Analysis (Campos Basin, Brasil)
Harsh Environment FLNG FPSO (NW Shelf, Australia) Turret Design (Granherne - KBR)

CALM BUOYS & EXPORT SYSTEMS
Dai Hung FPU and FSO Calm Buoy (Vietnam) - Structural Support Design (BHPB)
Wandoo CALM Buoy Submarine Hose Replacement Analysis (NW Shelf, Australia, Dunlop Oil and marine)
Wandoo CALM Buoy SFeasibility Study and re-lifing Management Plan (NW Shelf, Australia, Vermilionl)
CALM Terminal (off Dar Es Salaam, Tanzania) design and analysis of the submarine hose system (SBM Offshore)
Wandoo Field Development CALM Buoy Loading System Submarine Flexible Hose Fatigue Analysis (NW Shelf, Australia, Vermillion)
Dai Hung FPU and FSO CALM Buoy (Vietnam) offloading operations assessment (BHP Petroleum)
Kumul Marine Terminal (PNG) CALM Buoy Replacement (Oil Search)
FSO Africa and FSO Asia (Persian Gulf, Qatar) CALM Buoy hawser studies (North Oil)
TLU-2 CALM Buoy Mooring Life Extension (Colombia, OCENSA)
CALM Buoy Mooring Life Extension Study (Argentina, confidential client)
Caleta Cordova CALM Buoy Mooring Life Extension (Argentina, TERMAP)
Pozos Colorados CALM Buoy Mooring Life Extension (Colombia, OCENSA)
Kumul Marine Terminal (PNG) CALM Buoy Mooring Trenching Assessment (Oil Search Limited)
Kumul Marine Terminal (PNG) CALM Buoy Hose Assessment (Oil Search Limited)
Kumul Marine Terminal (PNG) Operations Review and Uptime Study (Oil Search Limited)
Caleta Olivia CALM Buoy Mooring Life Extension Support (Argentina, TERMAP)
Code Compliance and Industry Practice Review – CALM Buoy (Chile, ENAP)
Offshore LNG Export Terminal (PNG) Feasibility and Concept Study (Horizon Oil)
Al Shaheen FSO (Middle East) Operations and Field Development studies (Mearsk Oil Qatar)
Repsol Tarragona CALM Buoy Submarine Hose Analysis (Spain, Dunlop Oil & Marine)
Tuban CALM Buoy Submarine Hose Replacement Analysis (Indonesia, Dunlop Oil & Marine)
Kizomba A & B Export CALM Buoy Floating Hose Analysis (Angola, Dunlop Oil & Marine)
Cendor Tandem Loading Floating Hose Analysis (Malaysia, Dunlop Oil & Marine)
CALM Buoy and FSO Coupled Dynamic Analysis (Persian Gulf, Qatar, Maersk Oil Qatar)
Floating Hose Dynamic Behaviour Investigation and Novel Floating Hose Design (Persian Gulf, Qatar, Maersk Oil Qatar)
PL2 Life Extension Study and Oil Export CALM Buoy Replacement Study (PNG, Oil Search)

MOORINGS (Integrity Management)
Cossack Wanea Lambert Hermes FPSO (NW Shelf, Australia) Mooring System Integrity (Woodside)
Nganhurra FPSO (NW Shelf, Australia) RTM Mooring System Integrity (Woodside)
Basker Manta (Australia) mooring node Design, Strength and Fatigue Assessment
Northern Endeavour FPSO Internal Turret Mooring System Integrity (Timor Sea, Australia, Woodside)
Bayu-Undan FSO (Timor Sea, Australia) Mooring System Integrity (ConocoPhillips)

FATIGUE ANALYSIS & LIFE EXTENSION
FPSO Fatigue Assessment of Hull for Life Extension Assessment
Offshore Mono-tower Platform Fatigue Assessment and Life Extension Certification (Australian North West Shelf, Vermillion Energy)
Basker Manta (Australia) mooring node Design, Strength and Fatigue Assessment
Longtom Jackup (Australia) - Fatigue Analysis (Nexus)
FPSO Cidade de Sao Mateus (Brazil) - fatigue analysis (Prosafe Production Pte)
Yolla 'A' Platform (Bass Strait, Australia) Dynamic Motion Monitoring, Structural Assessment of Installation Bumper For Use During Upgrade Lift Module Operations (Origin)
Kumul Platform (PNG) Dynamic Motion Monitoring, Statistical Analysis, Structural Stiffness Assessment (Oil Search)
Wandoo A Platform (Australian North West Shelf) Jacket and Topside Structural Assessment for Life Extension Certification (Vermillion)
Well Head Jacket Platform (New Zealand) Structural Audit and Inspection Plan Development for Life Extension (OMV)
FPSO Fatigue Assessment of Hull as part of a Life Extension Assessment (Confidential Client)
FPSO Frame buckling and compliance assessment (Confidential Client)
FPSO Fatigue Analysis Operational Loading Review (Confidential Client)
OSX3 FPSO Riser Survival and Fatigue Analysis for I-Tube Design (Campos Basis, Brazil, SOFEC)
Griffin FPSO (NW Shelf, Australia) Life Extension (BHPB)

RISERS
Stybarrow Disconnectable FPSO (Australia) - Riser Verification Analysis (BHPB)
Offshore Mono-tower Platform Fatigue Assessment and Life Extension Certification (Australian North West Shelf, Vermillion Energy)
Basker Manta (Australia) IFDP FPSO Riser System Design (Roc Oil / AGR)
Longtom Jackup (Australia) - Fatigue Analysis (Nexus)
Riser System Design Verification for Ichthys Field - CPF North Face, CPF South Face, FPSO (INPEX)
Flexible Riser Solution for West Tuna Platform (Bass Strait, Australia, ESSO)
Riser system design definition for Te Giac Trang (TGT) FPSO FEED (South China Sea, Vietnam) and ITT Support (Bumi Armada Berhad)
Bunga Orkid (south China Sea, Malaysia) Flexible Riser Installation and Analysis Support (Franklin Offshore)
Jack-Up Drilling Riser Analysis pre-FEED and FEED (Timor Sea, Australia, Nexus Energy)
Confuguration design of Van Gogh (NW shelf, Australia) Disconnectable Riser System (Prosafe Production Pte)
Pre-feasibility, FEED and Execution engineering support for Stybarrow Disconnectable FPSO (NW Sgelf, Australia) Mooring (BHPB)
Preliminary Riser Configuration Design and Analysis Support (South east Asia, Confidential client)
Basker Tubing 155m WD Workover Riser Analysis (Bass Strait, Australia)

CABLES & PIPELINES
Pipeline Repair and Abandonment studies (Bass Strait, ESSO)
Basslink HVDC Interconnect Pipeline Risk and Design Basis
Basslink HVDC Interconnect Cable Routing and Risk Assessment Study
Kipper Field (Bass Strait) tie in to West Tuna subsea pipeline tie-in conceptual design (ESSO)
Model test and validation for a proposed berm design (Australia)
Subsea Cable Conceptual Engineering for a wave energy device tieback (Bass Strait, Australia)
Design verification of rock berm for stability and anchor drop impact protection (Jindo-Jejudo Interconnection, Korea)
Pipeline Stabilisation Projects: Gorgon LNG Trunkline, Airlie Trunkline, West Tuna / Bream B, North Rankin, Browse LNG Project
Pipeline and Subsea Wellhead Installation design and analysis: ESSO Australia, McConnell Dowell, Reliance/AGR, BHP Petroleum, Nexus Energy (Longtom), Roc/AGR, Woodside (Laminar)

MOORING CHAINS
Mid Depth Buoy (MDB) Mooring Chain Tether Residual Strength Assessment (Australia, BHPB Petroleum)
FPSO Raroa (New Zealand) Mooring Chain Link Strength and Fatigue Life Assessment (OMV)
Mooring Chain Design Finite Element Strength and Fatigue Analysis (Australia, Woodside)
Fitness for Purpose Assessment of Reduced Width Mooring Chain Link (USA, Sanmar Chain International)
FPSO (Gulf of Mexico (America)) Chain Link Structural Assessment Under Lateral Loading (Confidential Client)
FPSO (Gulf of Mexico (America)) Mooring Chain and Hawsepipe IPB/OPB Fatigue Life Assessment (Confidential Client)
FPSO (Gulf of Mexico (America)) FPSO Residual Capacity Assessment of Hawser Top Chain Link Wear (Confidential Client)

VIV
Jumper Analysis - including FEA and VIV (Myanmar, McDermott)
Detailed analysis of VIV fatigue life of rigid jumper spools (Northwest Shelf Australia, Apache)
Umbilical Span Response - Estimation of fatigue damage on umbilical end termination spans due to both in-line and cross-flow VIV (Angola, BP)
Jumper VIV Modelling (Exxon Mobil)
Jack-Up Drilling Riser Analysis for planned work-over and completion operations (Bass Strait Australia, Nexus Energy)
Okha Riser Turret Mooring (Northwest Shelf, Australia) Motion Study, including Vortex Induced Motion (VIM) Assessment (Woodside)
SHEAR7

NAVAL ARCHITECTURE
WTN and BMB Platforms Concrete Gravity Structure Hydrostatic Analysis and Review Advice (Olav Olsen AS)
Trim and Stability Book Update for FPSO Raroa 9OMV)
FPSO Northern Endeavour Tank Loading Sequence (Woodside)
Drilling Unit Sagar Samrat MOPU Conversion Owners Engineer Support (Wood Group PSN)
FSO ASIA/ FSO AFRICA Operations Study - FSO Tank Management (Maersk Oil Qatar)
Kingfish B Seakeeping, Structural Assessment, Operability Limits (PSN)
Boskalis Cyclone Moorings - Seakeeping, Mooring Design Verification and Installation
Havila Phoenix Global Strength Assessment (TS Marine)
JASCON 25 Bridge - Operability Limits (Origin)
FPSO FEED studies - Ship Hydrodynamic Studies, Hull Structural Assessments (Mustang Engineering)
FPSO FEED studies - Ship Stability Assessments, Hull Structural Assessments, Ship Hydrodynamic Studies (Bumi Armada)
WTN Separator Vessel - Seakeeping and Structural Assessment (PSN)
Condensate/Gas Export FPSO (SE Asia) pre-FEED marine engineeirng and naval architecture support (BP)

HYDRODYNAMICS
Dis-connectable Turret Mooring, Overset Meshes, Drag and Added Mass Coefficients, Model Test Data Validation (USA, confidential client)
Underkeel Clearance Scour Investigation, Screening Study, Validation With Empirical Studies for Port of Melbourne (Australia, Maunsell)
Mooring Mid Water Arches Drag and Added Mass Coefficients, Harmonic Motions, Overset Meshes
Scarborough LNG FPSO (NW shelf, Australia) Deck Motions study (BHPB)

BLAST MODELLING
Offshore Drill Rig Operations, Gas Leaks dispersion, blast explosion modelling, water deluge investigation for Origin Energy's Yolla 'A' Platform
Gas leak dispersion analysis, blast explosion modelling, dynamic Finite Element (FE) analysis for Marlin A (MLA) Platform for PSN and Esso Australia
Gas leak dispersion analysis, blast explosion modelling, platform structural integrity, risk analysis for Marlin B Platform for DNV, JRMAP and Esso Australia
Jet fire modelling, blast explosion modelling, platform structural integrity for Yolla 'A' Platform for Origin Energy

Defence Projects

ANZAC Class
Responsible for ANZAC project performance to budget and schedule, and compliance of the delivered ship’s with technical specifications. Involved in the successful instigation, negotiation and operation of the ANZAC Class Alliance Contract between Tenix defence, SAAB and Commonwealth of Australia for the ongoing support of the ANZAC Class of ship’s post delivery (Tenix Defence Marine Division)
Established the complete Safety Case for the ANZAC Class frigate, consolidating the 10 vessels (and different configurations) and using this framework to establish an online Hazard Log (ANZAC SPO)
Development of a Safety Case Report for the Royal Australian Navy’s ANZAC Class Frigates (RAN)
Naval Architecture support to the ANZAC Ship project in areas such as weight control and sea trials conduct and analysis (Tenix Defence Marine Division)
ANZAC Class Frigate ASMD aft mast fire modelling, fire risk safety assessment (Tenix Defence)
ANZAC Class machinery space fire modelling, fire risk safety assessment, egress calculations (Tenix Defence)
Fire safety assessment of ANZAC Class frigate main machinery spaces (RAN)
ANZAC Class cradle construction, Frigate docking study, modified mooring analysis, floating dry dock study, dock and transfer safety assessment, lift and transport system safety assessment and manoeuvring and modelling study (AMC CUF)
Safety Case development for the ANZAC Frigate Harpoon Missile Launch Capability (Tenix Defence)
System Safety Program and developed a Formal Safety Assessment for the integration of the Thales Underwater Systems Petrel Mine and Obstacle Avoidance Sonar into the ANZAC Frigate (Tenix Defence)
Review of existing safety analysis conducted on the ANZAC Frigate Combat System for suitability to act as the basis for the Safety Case for the MK-3E Software upgrade program safety case (Tenix Defence)

HOBART Class (DDG)
System safety program and the development of a System Safety Program Plan and supporting documentation for the Air Warfare Destroyer Project including software safety, hardware safety, integration of risk control measures into system design, management of system safety (Raytheon / AWD Alliance / DMO / ASC))
Developed and conducted the System Safety Program for the Air Warfare Destroyer project including the development of requirements for subcontractor safety programs (Raytheon)
DDG Human Factors Study (BAE Systems)
AWD System Safety support (Gibbs & Cox / Raytheon)
AWD Project external communications safety program and assessment (Rohde & Schwartz)
System Safety Engineering Training Course (Raytheon)
AWD Project suitability of water mist system (Nova Defence)
AWD water mist fire fighting risk assessment (AWD Alliance)
Air Warfare Destroyer system safety training (Gibbs & Cox)

ADELAIDE Class (FFG)
SEA1390 FFG Upgrade system safety support 2004-2008 (ADI / Thales)
Produced a framework for the development of a Safety Case for the upgraded ADELAIDE Class Frigate, including integration of MIL-STD-882C safety program tasks into a modern performance based Safety Case framework associated with the operational functions of the Upgraded FFGs
Involved in the management of the acquisition of the LESCUT MR(A) acoustic torpedo decoy
Member of Commonwealth ADELAIDE Class Frigate Upgrade Team (RAN)
Technical review of replacement sonar dome for suitability (RAN)

KANIMBLA Class (Landing Platform Amphibious (LPA))
Developed a Formal Safety Assessment for fire risk on the RAN Amphibious Landing Platforms (RAN)
Numerical modelling of lifting operations of watercraft onto LPA deck (DMO)
KANIMBLA Class LPA Risk Treatment Program (RAN)
Fire Risk Studies for HMAS Manoora and HMAS Kanimbla (RAN)
Review of Engineering Documents, Analysis of LPA Watercraft Lifting Operations (RAN)
Provided Naval Architecture support to the JP2048 Phase 1 project for the refit and conversion work on HMAS Manoora and HMAS Kanimbla at Forgacs Dockyard in Newcastle (Tenix Defence Marine Division)

Auxiliary Oiler Replenishment (AOR)
SEA1654 Principal Engineering and Specialist Systems Safety Support (NSSG)
SEA1654 Auxiliary Oiler Replacement - MV Delos system safety program
AOR Certification Manager (NSSG)
Wind Tunnel Modelling, Flight Operations Assessment for the conversion of the MV Delos Conversion Helicopter Deck (Tenix Defence)
MV Delos Conversion to HMAS Sirius Fire Safety Assessment for Accommodation Spaces (BAE Systems)
Analysis of the Replenishment at Sea (RAS) System planned for installation into the NUSHIP Sirius and the development of the safety case to support the activity (Tenix Defence)
Coordination of the conduct of scale model wind tunnel testing of HMAS Sirius, using the wind tunnel facilities at Monash University, Clayton (Tenix Defence)

ARMIDALE Class (Patrol Boat)
Development of the System Safety Program Plan for the Armidale Class Patrol Boat System Safety Program (DMS)
Armidale Class Patrol Boat - Safety Activities
Armidale Class Patrol Boat - Exhaust Plume Analysis, Wind Tunnel Validation, Sea Trial Measurements
ARMIDALE Patrol Boat Safety Case refresh (PBSPO)
Armidale Patrol Boat RHIB Safety Case (PBSPO)
Air Quality Measurement (PBSPO)

LEEUWIN Class (Survey Ship (AGS))
LEEUWIN Class Safety Case. The deliverable for this program was seen as a template for others to follow (HSPO)
Numerical modelling of lifting operations of watercraft onto LPA deck (DMO)
LEEUWIN Class Hydrographic Vessel Seakeeping Assessment
Fixed Firefighting System (FFFS) Upgrade Feasibility Study for Hydrographic Vessel (BAE Systems)

COLLINS Class (Submarine)
Electrical cabinets fire suppression assessment, physical model validation (Australian Submarine Corporation (ASC))
Cormal Safety Assessment - return from deep diving depth (RAN)
Coordinated all logistics and the management and development of the Submarine Safety Engineering Forum program to assist the Australian Submarine community (ASC)
Developed a Safety Assessment Report for the introduction of the MK-48 Mod 7 Torpedo into the COLLINS Class Submarine (ASC)
Quantitative analysis of the recovery capabilities of the COLLINS Class Submarine (ASC)
Special forces modifications to COLLINS Class submarine (ASC)
Conducted a safety assessment of the upgrade to the COLLINS Class Submarine SCYLLA Sonar System (Thales)
Submarine Hull Form Hydrodynamics - DARPA Submarine (Suboff), Joubert Submarine, Marin BB2, Manoeuvrability, LES Modelling

Other
AMECRC High Speed Displacement Hull Form series model test program
Safety Case for the docking and transfer system at the Common User Facility site (AMC)
Set up and conducted a system safety program for the lift and transit of large maritime platforms (i.e. Ships and submarines) by floating dock and then a trailer system (Landcorp CUF)
Conducted a risk based review of the stowage and handling of unleaded petrol on board RAN vessels (RAN)
Identification and assessment of the toxic effects of the by-products of halogenated fire suppressants (i.e. Halon, FM-200, NAF-S-III, etc.) post deployment of such agents on a fire (RAN)
Marine security barrier structural design (HALO, USA)

Royal New Zealand Navy
Project Protector system safety program (Tenix Defence)
Project Protector System Safety Program – Ship to Shore, Whole of Ship Safety Program, MRV-LCM Interaction Study, ILS Support (RAN)
Project Protector System Safety Program – Ship to Shore, Whole of Ship Safety Program, MRV-LCM Interaction Study, ILS Support (RAN)
HMNZS Canterbury Ship Hydrodynamic Studies (Tenix Defence)
HMNZS Canterbury Ship LCM Deployment and Recovery Operations (Tenix Defence)

LAND
M113 and ASLAV Vehicle Mine Blast Simulation Model Development and Correlation (DMO/LEA)
LAND 8710 – Littoral Manoeuvre Vessels for the Australian Army - Systems Safety Engineering Management
Safety Case Assessment Evaluation of the Land Motion Platform (DSTO)
Evaluator (ISA) of the Experimental Vehicle Simulator for DSTO in accordance with the Australian Defence legislative requirement (CAE Professional Services)
LAND154 Ph2 Weapons Technical Intelligence Level 2 Laboratory System Safety Program (Indra)

Major Hazard Facilities (MHFs)
MHF Due Diligence for Mulwala Munitions Manufacturing Facility (Department of Defence)
MHF Safety Report for Benalla Munitions Manufacturing Facility (Thales)
Defence Radiation Facilities Specialist Advisor on Potential Major Hazard Facilities (PMHFs) (Comcare)
Explosive Storage Facilities – Port Wakefield Proof and Experimental Establishment, South Australia, Specialist Advisor on Potential Major Hazard Facilities (PMHFs) (Comcare)
Safety Case Assessments for Thales' MHF Re-license - Explosive Ordnance (EO) Depots (Thales)
Specialist advice on Explosive Ordnance, System Safety Engineering and Major Hazard Facilities for the Point Wilson Wharf upgrade program (Leighton Contractors)
Provided services to Thales Australia Limited in relation to an assessment of the safety report for several explosive ordnance (EO) storage facilities operated by Thales Australia Limited EO Services (Thales)

AIR
RAAF Williamtown Base independent compliance review of the HAC (Dust and Fluids) (Australian Department of Defence)
Development of In-Service Safety Case for TAOT (Rohde & Schwarz)
Development of In-Service Safety Case for TAOT (Rohde & Schwarz)
TAOT mid-life upgrade System Safety support (Rohde & Schwarz)
Provision of System and Software Safety expertise for the F111 BUP program, including the interpretation of DO-178B to a legacy development; the conduct of annual audits and assessments; the review of safety and certification deliverables and approval of the software program (SRSPO)
Developed Safety Targets for CAT 2 UAS systems including an industry wide literature review and interpretation against defence requirements (DGTA)
RAAF Williamtown Base Corrosion Control Facility HAC (GHD)
ARH and MRH software compliance (Australian Aerospace)
Safety Targets Development for Unmanned Air Vehicle
Model Regulations Gap Analysis Work Health and Safety (WHS) Legislative Compliance (TFSPO)
WHS-OPS Risk Assessments on 179 CIs (AMSPO)
Safety Assessment of Rechargeable Air Breathing Apparatus (COLSPO)
Safety Assessment of C-130H and C-130J aircraft Explosion Suppressant Foam (ESF) installations (ALSPO RAAF)
Review of C130J Safety and Certification Deliverables; the development of airworthiness advice to DGTA for airworthiness boards, and the general provision of expert safety and certification expertise to the acquisition SPO (DGTA)
Delivered 5-day System Safety Engineering Master Class training course, which included Defence personnel (EEA)
Delivered 5-day System Safety Engineering Master Class training course, which included Defence personnel
OneSky COTS Software Assurance Assessment (Thales)

Mining Projects

MINING EQUIPMENT
Stacker Conveyor Life Extension (Indonesia)
Vibration Measurement for Validation for product screens (Australia)
Conveyor Structure and Take Up Tower life extension (Indonesia)
Stacker Conveyor Vibration Investigation (Indonesia)
Balanced Machine Analysis PIR Closeout Support for a fixed shiploader (Australia)
Brockman 2 Primary Crusher Risk Based Inspection (RBI) Process (Pilbara, WA, RTIO)
EII Car Dumper 2 Risk Based Inspection (RBI) Process (Parker Point, Dampier, WA, RTIO)
Structural and Mechanical Assessment of reclaimers (Paraburdoo, WA, MMH)
Stacker 5 BMM-SG and Substructure Plate Model verification (Port Headland, WA (BHPB Iron Ore)
Bucket Wheel Reclaimer BWR8 SG Model Verification (Port Headland, WA (BHPB Iron Ore)
Shiploader Bogie Corrosion Repairs (Cape Lambert, Australia, Pilbara Iron)
REC2P Parker Point Reclaimer Strain Gauge Specification Development and Structural Assessment plus FE Model Development(Dampier, Australia, RTIO)
REC3P Bucket Wheel Reclaimer Structural Strength and Fatigue Performance Assessments (Australia)
Primary crusher Risk Based Inspection (RBI) Process (Australia)
Reclaimer Inspection for Engineering Repair North Pulau Laut Coal Terminal (NPLCT), Indonesia, PT Arumin)
Reclaimer Inspection (Engineering Repair), Shiploader Inspection Design study risk assessment of machine faults, and Stacker Inspection (North Pulau Laut Coal Terminal (NPLCT), Indonesia, PT Arumin)
Bucketwheel Excavator Shaft Redesign (North Pulau Laut Coal Terminal (NPLCT), Indonesia, PT Arumin)
Shiploader Structural Assessment (Fincune Island, Australia, BHP)
Stockbridge Life Extension, Inspection, Condition Monitoring (Whyalla, Australia, OneSteel)
Scrapper Reclaimer Fatigue Life Assessment (Mount Thorley, Australia)

MINING EQUIPMENT (cont'd)
Stacker damage assessment to return to service (Cape Lambert, Australia, Pilbara Iron (RTIO)
Shiploader Structural Design Audit (South Africa)
Stacker / Tripper Structural Design Audit (Australia)
Cable Belt Conveyer Rope Wear Investigation (Boddington, WA, Worsley Alumina)
Reclaimer 1 and 2 (Parker Point) and Reclaimer (Tom Price) Plant Integrity Review (Australia, Pilbara Iron (Rio Tinto))
Drag Line Wire Rope Wear Assessment (Queensland, Australia, P&H MinePro)
Shiploader Inspection, damage Assesment, Refurbishment (East Intercourse Island, Australia, Pilbara Iron (Rio Tinto))
Stacker reclaimer fatigue life assessmen and integrity review (Kouaoua, New Caledonia , SLN)
Shiploader Wind Study (Newcastle, Australia, PWCS)
Raw coal stacker and tipper technical support for RPEQ Audit (China, MMH)
Dredger bucket wheel concept design evaluation (Loy Yang, Australia, PT Woon & Associates)

SITE INSPECTION
Stacker Conveyors and Shiploader Life Extensions (Indonesia)
Bridge and Gantry Crane Risk and Runway Identification For Operational Safety (Western Australia)
Impact Damaged Daily Service Facility Repair (Western Australia)
Bridge Crane Major Inspection and Assessment For Continued Safe Use (Western Australia)
Carbon Stripping Plant Regulatory Compliance Audit (Western Australia)
Reclaimers End of Fatigue Life Assessments and Measurement Campaign (Australia)
Parker Point Reclaimer 1 and 2, Plant Integrity Review (Western Australia, Pilbara Iron)
Tom Price Reclaimer Plant Integrity Review (Western Australia, Pilbara Iron)
Whyalla Stockbridge Life Extension, Inspection and Condition Monitoring (Australia, OneSteel)
North Pulau Laut Coal Terminal (Indonesia) Stacker Inspection (PT Arutmin)
North Pulau Laut Coal Terminal (Indonesia) Reclaimer Fatigue Crack Inspection and Repair Assessment (PT Arutmin)
Cape Lambert Shiploader Bogie Corrosion Repairs (Australia, Pilbara Iron)
Geraldton Port Bulk Handling Facility (Western Australia) Facility Inspection and Fire Safety Engineering (Mid West Port Authority)
Coal Terminal (Queensland, Australia) Facility Inspection and Fire Safety Engineering
Minesite Processing Plant (Australia) Fatigue Risk Assessment of Fixed Plant including Visual Inspection
Conveyor take up area inspection and assessment (Indonesia)
Dragline Wire Rope Wear Assessment (multiple sites across Queensland Australia) (P&H MinePro)
Stacker Conveyor Vibration Investigation (Indonesia)
Mackay Queensland Sugar Limited Fire Safety Review Facility Inspection and Fire Safety Engineering (North Queensland Bulk Ports (NQBP))
Mackay Graincorp Fire Safety Review Fire Safety Review Facility Inspection and Fire Safety Engineering (North Queensland Bulk Ports (NQBP))

CRANES
Western Australian Minesites Bridge and Gantry Crane Risk and runway Identification For Operational Safety (Confidential Client)
Western Australian Minesites Bridge Bridge Crane Assessment For Continued Safe Use (Confidential Client)
Western Australian Minesite Mobile Crane Modification and Regulatory Assistance (Confidential Client)
Western Australian Minesite Bridge Crane Major Inspection and Assessment For Continued Safe Use (Confidential Client)
Western Australian Boat Crane Remediation Support (Confidential Client)

Legal & Expert Witness (including failure investigations and forensic engineering)

MINING & STRUCTURES
Minesite Drill Rig Tower Forensic Failure Investigation (Western Australia)
Structural Collapse of a Bucket Wheel Excavator Failure Investigation, Expert Opinion and Court Appearance. (Australia, Baker McKenzie )
Expert Advice relating to Collahuasi Shiploader Collapse. (Chile, Rose LLP)
Structural Design and Expert Report Investigation into Collapse of Tubular Space Frame Structure Mining Machine (South Africa, Markram Attorneys Inc.)
Wyee Colliery drift winder rope Failure Investigation (NSW Department of Mines)
Bolt Failure Technical Investigation (confidential client)

OFFSHORE
Ruwais Oil Refinery (Abu Dhabi) Pipeline Failure Analysis (Chlyoda Corporation)
Expert Opinion in an Offshore Energy Project Construction Dispute (Malaysia, De Brauw Blackstone Westbroek, Singapore Pte Ltd, on behalf of Sabah Shell Petroleum Company Limited)
Expert Opinion on a Dispute in regard to the failure of a CALM buoy mooring system. (New Zealand, Izard Weston Lawyers)
Expert Opinion relating to an Offshore Drilling Contract Dispute (Victoria, Australia, confidential client)
Expert Opinion relating to Vessel ballasting for FPSO, FPU and FSRU vessels (Western Australia, Watermark Intellectual Asset Management)
Expert Opinion relating to a Mooring Line Wire Rope Failure (Western Australia, confidential client)
Failure Investigation and Expert Opinion relating to an offshore accident. (Victoria, Australia, Maddocks Lawyers)
Injury to Oil Platform Worker in High Winds Expert Opinion (Victoria, Australia, K&L Gates LLP)
Riser Chain Failure Investigation Expert Report. (USA, Norton Rose Fulbright)
Re-Deployment Potential of a Pre-Configured FPSO expert report. (South East Asia, Corrs Chambers Westgarth)
Expert Opinion on Fitness for Purpose and Readiness for Work of a Semi-submersible Mobile Offshore Drilling Unit (Australia, Kelly Co Solicitors)
Tiebaghi Mooring Failure expert opinion (New Caledonia, Barclay Mowlen)
Failure Investigations relating to the FSO MV Hikari Orient (Vietnam, BHP Petroleum (Dai Hung))
Expert opinon on design adequacy of Cossack-Wanaea FPSO (Australia, John Holland Engineering and Deacons Graeme James Solicitors)
Investigation into the failure of a drilling riser mud booster line during drilling operations (Sergipe Alagoas Basin, Brazil, Transocean)
Expert Opinion on CALM Buoy Hawser Failure (South America, confidential client)

PORTS & HARBOURS
Structural failure of RO-RO ferry terminal ship fenders. Investigation and expert opinion for purpose of litigation inclduing extended participation in expert conclave sessions. (UK, Barlow Lyde and Gilbert LLP)
Failure of navigation aids Expert Report (Western Australia, Norton Rose Fulbright )
Concept barge mooring design expert opinion. (UK, Gardiner & Theobald Fairway Ltd)
Collahuasi shipload collapse expert advice. (Chile, Rose LLP)
Floating Wharf Failure expert opinion. (Western Australia, Jackson McDonald Solicitors)
Beacon Pile No 6 South Channel in Victoria failure investigation. (Victorian Channels Authority
Lancelin boat crossing bar accident - facility studies. (Western Australia, Parker and Parker Solicitors)
Independent third party navigation aid structural assessment (Australia, Confidential Client)
Independent third party structural assessment for a port import terminal (Chile, Confidential Client)
Greenwich Pier ship collision damage assessment (UK, Insurers to Thames Water Authority)
Forensic engineering preliminary review of wave loadings on a breakwater structure (Victoria, Confidential Client)
Expert opinion on wastewater outfall drop shaft design and contract documentation (ACT, Buddle Findlay Lawyers)
Expert report on Damage to Basslink Transformers During Sea Transportation (Victoria, Evans & Peck)
Floating Pontoon Design And Certification Expert Report, Attendance at Expert Conclave, Expert Joint Report. (Queensland, Lander & Rogers)
Floating Wharf Failure Expert Opinion (Australia, Jackson McDonald Solicitors)
Expert Opinion on a Cyclone Mooring Pigtail Failure (Lander & Rogers)
Expert Opinion on a Concept Barge Mooring Design (UK, Gardiner & Theobald Fairway Ltd)
Expert Opinion on the Gellibrand Pier Oil Spill (Victoria, Australia, Holman Fenwick and Willan)
Ausgrid Botany Bay Cable Project expert advice (New South Wales, Australia, Clayton Utz)
Expert Opinion as to level of innovation and technical risk for the Wooloomooloo Wharf Upgrade (New South Wales, Australia)
Definition of Vessel Classifications Expert Report and Court Appearance (Victoria, Australia, Clayton Utz)
Port Stanvic Wharf Refurbishment R&D Claim Technical Review (South Australia, Deacons Solicitors)
Investigation of Tug Harbour Navigation Aids’ Compliance to Contract and Causes of Failure (Norton Rose Fulbright, confidential client)

PLANT & EQUIPMENT
LNG Terminal Process Equipment Structural Elements Expert Reports, Attendance at Expert Conclave, Expert Joint Report (Allen & Overy)
Structural Failures of Plant Energy Recovery Unit and Associated Process Pipework: Expert Reports,Attendance at Expert Conclave, Expert Testimony (Israel, Norton Rose Fulbright)
Expert Opinion and Written Expert Statement relating to a Dispute under Victorian Civil and Administrative Tribunal (VCAT) - Planning dispute regarding a development close to a Major Hazard Facility (Victoria, Corrs Chambers Westgarth Lawyers)
Structural Failures of Plant Energy Recovery Unit and Associated Process Pipework: Expert Reports,Attendance at Expert Conclave, Expert Testimony (Israel, Norton Rose Fulbright)
Expert Opinion on LNG Terminal Jetty Construction Contract Dispute (Chile, Norton Rose Fulbright)
Waste Heat Recovery Unit (WHRU) Failure expert report (Western Australia, Clinch Long Letherbarrow Lawyers)
Waimakariri Ocean Outfall Expert Witness. (New Zealand, Buddle Findlay)
Rosedale Waste Water Treatment Plant Outfall expert opinion. (New Zealand, Buddle Findlay)

INTERNATIONAL ARBITRATION
Expert Report and Expert Evidence at Arbitration Hearing relating to a Dispute under International Arbitration Rules – Incomplete work and defects on a Semi Floating Production System (Semi FPS). (Malaysia, De Brauw Blackstone Westbroek, Singapore Pte Ltd)
Expert Report and Expert Evidence at Arbitration Hearing relating to a Dispute under International Arbitration Rules – Completion of Technical Ammonia Nitrate Plant, Pilbara Western Australia. (Western Australia and London, King & Spalding International LLP
Expert Report and Expert Evidence at Arbitration Hearing relating to a Dispute under International Arbitration Rules – Design dispute in regard to a subsea riser support system. (London UK, SLCG - Studio Legale Associato on behalf of Baker Hughes)

OTHER MATTERS
Grayston Pedestrian and Cycle Bridge Collapse Expert Opinion and Inquiry Hearings (South Africa, Werksmans Attorneys)
Expert Opinion for a Bolt Failure Technical Investigation (Australia, Wesfarmers)
Olympic Dam failure investigation. (South Australia, WMC Resources Ltd)

Expert report relating to Damage to Towed Acoustic Streamer Array (Western Australia Federal Court, Norton Rose Fulbright)
Leaking Concrete Pit Inspection and Expert Report (Victoria, Australia, Mason Sier Turnbull)
Expert Opinion I'm Sludge Thickener Dispute (Victoria, Australia, Minter Ellison)
Acoustic Attenuating Enclosures Expert Report (Western Australia, Mason Sier Turnbull)
Investigation into failed installation of ocean renewable device Field Engineering Inspection and Failure Report. (Australia, Clark McNamara)
Failure Investigation into to the design and installation of aquaculture mooring equipment (Tasmania, Australia, confidential client)

Expert report relating to Prosecution under Magistrates Court Queensland – Prosecution in regard to death of worker as the result of a collapse of overhead gantry crane (Harmers Workplace Lawyers)
Supreme Court of Victoria Class Action Kilmore East Fires Expert Opinion/Expert Witness. (Victoria, Australia, Herbert Smith Freehills)
Accommodation Vessel Drive Off Incident Expert Report. (Victoria, Australia)

Lancelin Fishing Boat Incident expert opinion. (Western Australia, Clayton Utz)
Provision of Expert Report relating to a Glasshouse Shading System Design and Performance Dispute (Victoria, Australia, HWL Ebsworth Lawyers)
Expert Opinion relating to Glass-Cutting Machinery Performance (Victoria, Australia, Arnold Bloch Leibler)
Inspection and Expert Report relating to Support to Audio Visual Screen Support Frame Dispute (Victoria, Australia, Thomson Gear Lawyers)
Expert Advice relating to Technical Review of Design of Australian Naval Vessel (New South Wales, Australia, confidential client)

Onshore Processing and Major Hazard Facility (MHF) Projects

MHF PROJECTS
MHF Licence Renewal and Safety Case Assessment for Thales' Benalla munitions manufacturing facility
Comcare MHF oversight assessment of Pacific National Freight Terminal
Compliance assessment against MHF regulatory requirements for Murrin Murrin Operations
Review of MHF Safety Assessment Processes for Thales across 14 explosive ordnance depot facilities in Australia
MHF Licensing Research for WorkCover NSW
Quantitative Risk Assessment (QRA) and MHF Evaluation Support to Dampier Port Authority's Wheastone LNG
MHF Safety Case Development for Challenger Mine

Safety Case Support to BHPB's MHF Minerva Gas Plant
Safety Case Development, Consequence modelling and Fire Safety Study for oen of Borden Chemical's chemical processing facilities
MHF Notification Support for Onesteel's Whyalla Facility
Comcare Site Safety Assessment of 3 radiation facilities
MHF Due Diligence Assessment of Mulwala Munitions Manufacturing Facility for the Australian Department of Defence
Safety Case development and Major Hazard Facility Licensing Support for Point Wilson waterside infrastructure remediation
Comcare specialist advice on MHF Classification of ARPANSA medical radiation facility
MHF notification support for concept/proposed chemical processing facility

SAFETY ASSURANCE
Safety Assurance (Prime Contractor) and technical safety work for a synthetic graphite pilot plant for Mineral Resources Limited
Safety Assurance (Prime Contractor) and technical safety work for Clean TeQ Sunrise nickel, cobalt, scandium Project
Safety Assurance (Prime Contractor) and technical safety work for Clean TeQ Sunrise nickel, cobalt, scandium Project

HAZARDOUS AREA CLASSIFICTION (HAC) PROJECTS
HAC (Dust), Electrical Equipment Register and Conformance Inspection for a Coca-Cola Amatil production facility
HAC (Fluids), Electrical Equipment Register and Conformance Inspection for a BHPB nickel smelter
HAC (Fluids), and quantitative risk determination for a BHP Nickel Smelter
HAC (Fluids) for a potash project power station
HAC (Fluids) for a hydroxide refinery for Covalent Lithium
HAC (Fluids) for a potash project processing plant
HAC (Fluids and Dust) and ALARP assessment of control measures of a synthetic graphite pilot plant for Mineral Resources Limited
HAC (Fluids), Risk Assessment and Electrical Equipment Register for covalent lithium hydroxide refinery
Project Review, Hazardous Area Classification (Fluids) and Electrical Equipment Register for Yangibana Rare Earths Project for FLSmith
HAC (Dust) and Mechanical Equipment Specification for Sunrise Ni, Co, Sc Project for Clean TeQ
HAC (Fluids) for cement plant
HAC (Fluids) for Wheatstone LNG for Dampier Port Authority
HAC (Dust and Fluids) for Port of Mackay for North Queensland Bulk Ports (NQBP)
HAC (Explosives and Fluids) for Point Wilson explosive ordnance facility for CPB Contractors
HAC (Explosives and Fluids) for Point Wilson explosive ordnance facility for CPB Contractors
HAC (Explosives and Fluids) for Point Wilson explosive ordnance facility for CPB Contractors
Dangerous Goods and Hazardous Materials Design Conformance for Kwinana Waste to Energy plant

RESIDENTIAL PROPERTY RELATED PROJECTS
Peer Review of Risk Assessment for Proposed Residential Property Development in Geelong, Victoria wrt Viva Energy Geelong Oil Refinery
Provision of Risk Advice for Proposed Commercial Property Development wrt Stolthaven Coode Island Terminal and the Quantem Coode Island Terminal
Provision of Risk Advice for Proposed Commercial Property Development wrt Qenos Altona Chemical Complex
Provision of Risk Advice for Proposed Commercial Property Development wrt Viva Energy Lara Terminal
Provision of Risk Advice for Proposed Commercial Property Development wrt Viva Energy Newport Terminal

Civil Maritime & Ports Projects

Port of Melbourne Channel Deepening Under Kel Clearance Scour Investigation, Screening Study, and Validation with Empirical Studies (Melbourne, Australia, Maunsell)
Port Wilson waterside infrastructure remediation Work Health and Safety (WHS) legislative compliance advice
Swanson Dock Container Cranes upgrade - requirements analysis
Adelaide Desalination Project Bid outfall and outfall diffuser design studies
Queensland Transport Nelly Bay harbour wave penetration study
Queensland Transport Nelly Bay pontoon concept design
Queensland Transport Nelly Bay ferry terminal design (Magnetic Island) Hayman Island breakwater and marina development studies

MARINE STRUCTURAL DESIGN
AMC Management / Landcorp CUF floating dock Layup berth design
AMC Management / Landcorp CUF floating dock dry docking concept level options
AMC Management / Landcorp CUF floating dock dry dock facility studies
Blairgowrie Safe Boat Harbour breakwater and marina development studies
Independent reviewer for Victorian Desalination Plant - marine engineering and hydrodynamics
Geelong Port Refinery pier integrity assessment
Structural capacity assessment for refinery pier mooring dolphins for Geelong Ports

RISK / SAFETY AND QRAs
MWPA Port of Geraldton Quantitative Risk Assessment (QRA) including transport QRA
NQBP Port of McKay assessments for regulatory license for importation of explosives
Fire and smoke safety, toxic releases, dust explosions, annualised risk contours mapping, QRA for Mackay Port for North Queensland Bulk Ports (NQBP)
NQBP Port of McKay Quantitative Risk Assessment (QRA) and port land use planning
NQBP Port of Weipa Quantitative Risk Assessment (QRA) and port land use planning
Fire safety review for Adani Abbot Point Coal Terminal (AACT)
Pilbara Iron / Rio Tinto iron ore ship loader upgrade/ refurbishment structural assessments
Coal shiploader wind study
Consequence Modelling, Fire Safety Philosophy and System Specification for Fremantle Sailing Club
Consequence modelling, fire and gas philosophy and system specification for Clean TeQ's Sunrise Project
Consequence modelling, fire safety philosophy and design assurance for Port of Geraldton for Mid West Ports Authority

ENVIRONMENTAL STUDIES
Northern Territory Mary River Wetlands Study
Department of Water Resources - Snowy River Estuary environmental investigation
Shell Australia and Mobil Refining Port Phillip baseline study
Queensland Transport Nelly Bay Harbour flushing study
Port of Geelong dredging expert peer review of Environmental Effects Statement
Apache Energy Onslow Plain erosion control
Melbourne Ports Corporation Webb Dock EES (physicochemical component)
Port Kembla Copper - Port Kembla Harbour Study
State Government of Victoria - Newport Power Station review
SECV & EPA - Newport power station thermal plume studies

AQUACULTURE MOORINGS
Fish Farm Mooring Verification Analysis (Lippies and Browns, Tasmania (Tassal))
Combined Mooring Design Analysis (Zuidpool, Tasmania, Huon Aquaculture)
Independent Review of Mooring System Design (Storm bay, Tasmania, Huon Aquaculture)
Fish Farm Mooring Component Verification (Zuidpool, Tasmania, Huon Aquaculture)
Design of an underwater system for a large sea sponge aquaculture project (Palm Island, Queensland Dept of State Development)
Fish Farm Mooring System Verification (Roaring Beach, Tasmania, Jeyco)

FACILITIES STUDIES
Port of Melbourne channel deepening squat value study
Geelong Port refinery pier analysis of tanker berthing and mooring loads
Port Stanvac Wharf CALM Buoy refurbishment project for Mobil/Sheddon uhde
Queensland Transport deivation of preliminary boarding pontoon motion criteria
James Cook University / Reef CRC - Great Barrier Reef moored pontoon naval architecture design guidelines

INTERNATIONAL PROJECTS
Koniambo Nickel (New Caledonia) project seawater intake system stilling basin design - outfall and outfall diffuser design studies
LNG Import Terminal (Philippines) Quantitative Risk Assessment (QRA)
Import / Export Facility (Angola, West Africa) concept selection and Pre-FEED
PT Newmont Nusa Tenggara Batu Hijau Mine (Indonesia) - outfall and outfall diffuser design studies
BHPB LNG import terminal (Chile) Pre-FEED
Kumal Terminal (Papua New Guinea) upgrade Pre-FEED
BHPB Angostura Development (Trinidad) CALM Buoy export facility pre-feasibility study
BHPB Cabrillo Port (USA) pre-FEED and FEED engineering support
LIHIR Goldmine (Papua New Guinea) tailings and overburden disposal ocean outfall and outfall diffuser design studies
Van Oord Ship Management BV self-propelled cutter suction dredger (Rotterdam, The Netherlands) performance based fire modelling analysis, tenability risk assessment, egress evaluation

Rail and Transport Projects

RAIL
Rail Corporation NSW system safety support to Stage 3 OSCAR Project
Rail Corporation NSW system safety support to rolling stock public-private partnership
Transport for NSW (TfNSW) system safety support to the North West Rail Link
System Safety Support to Rolling Stock Public-Private Partnership
Software SIL Assessment of Internal Emergency Door Release (IEDR)
DTEI Public Transport Services initial scoping of safety case
Downer EDI Rail software SIL assessment of Internal Emergency Door Release (IEDR) - Millennium
Downer EDI Rail software SIL assessment of Internal Emergency Door Release (IEDR) - Oscar
Sydney Trains Sydney Metro Network evaluation of use of train whistle for tunnel safety
Northwest Rapid Transit safety assurance and SIL verification - power control systems for Sydney Metro North West

UGL Unipart Independent Safety Assessment (ISA) of Tangara technology upgrade
UGL Unipart SIL allocation and verification of Tangara systems
Northwest Rapid Transit safety assurance and SIL verification Sydney Metro North
OEM Technologies SIL assessment of Internal Emergency Door release (IEDR) - Tangara
Melbourne Metro Tunnel human factors integration (Cross Yarra Partnership (CYP))
Development of Safety Assurance Training Course for Railcorp NSW
System safety support to Stage 3 Oscar Project for Railcorp NSW

TUNNELS
RTA NSW M5 East tunnel ventilation modelling
WestConnex M4 East Tunnel ventilation stack monitoring system design
WestConnex M4 East Tunnel Reliability Maintainability and Safety Assurance (RAMS) program
WestConnex M5 East Tunnel Reliability Maintainability and Safety Assurance (RAMS) program
RMS NSW M5 East Cooks River Crossing Tunnel maintenance and integrity management plan
Independent technical consultant to the RMS NSW M5 East air filtration project
NRT Sydney metro North safety assurance and SIL verification for tunnel ventilation system
Connect East Eastlink Mullum Mullum and Melba Tunnels independent verification for tunnel asset integrity
PTA Rockingham Station smoke removal method evaluation for design development
Transfield Melbourne City Link Tunnels CFD Evaluation
NorthConnex M1-M2 Tunnel Safety Assurance and SIL Verification of Operation Management and Control System
North East Link Project Definition of Safety Assurance Requirements

CONFIDENTIAL PROJECTS
Rail crossing fatalities Quantitative Risk Assessment (QRA)
Road tunnel incident Quantitative Risk Assessment (QRA)
Road tunnel operations Semi-Quantitative Risk Assessment
Haulage Route Selection Quantitative Risk Assessment (QRA)
Autonomous Haulage System (AHS) assessment of proposed modification
Mode of haulage comparison Semi Quantitative Risk Assessment (QRA)

Click below for more information on our past and proposed Joint Industry Projects (JIPs)